As an energy-saving and environment-friendly product, the power regulator is applied in various industries. It can make the use of electric energy more efficient and save electric energy by controlling the current and voltage. So what should we pay attention to when installing the power regulator? Now let's introduce Taiwan Huate to you:
1. Installation method of power regulator: wall-mounted vertical installation. All bolts shall be tightened during wiring, and the power supply shall be in from top to bottom.
2. Load over-current protection: The regulator reserves the position for installing the fast fuse RS0. The selected installation configuration can be calculated according to 1.5 times of the actual load current.
3. The working environment temperature of the power regulator: - 10~+50 ℃, and it shall be placed in a ventilated place.
4. Relative humidity of working environment of power regulator: * 90% RH.
What should be paid attention to when installing the power regulator?
5. It should be installed in a place free of corrosive, flammable gas, and a large amount of conductive dust, where wiring and maintenance are convenient. It should not be installed next to heat source appliances, nor should it be directly exposed to the sun on the power regulator.
6. If overcurrent occurs during use, check whether there is short circuit under load.

7. The incoming lines R, S and T of the three-phase AC circuit of the power regulator have no phase sequence requirements. The N line is only used for the internal power supply of the regulator. The input control terminal and the N line are fully isolated and insulated. U, V and W output terminals can be connected with △ load or Y load (N wire is not required).